Parts & Accessories

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - Blaster high-flow bite valve w/ shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside pack - Molded 3D bottom for much better drying between rides

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

- Universal bar mount bottle cage adapter fits 22.2-35mm diameters - Can be adjusted to any angle using the provided 4mm hex wrench - Tough nylon composite construction - Bottle cage not included

Switch your TWIST Bottle from bike to bike with an extra TWIST Bike Base. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your Bike Base. Compatible with all TWIST Bottles. - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bottles

Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases. Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin. - Suitable for all TWIST bottles with a belt - Fits all TWIST bases

TWIST Bottle Connector for TWIST 450, 590, 600, and 750 Bottles. Not compatible with TWIST 800 or KEEGO Bottles. Easily attach your new connector by placing it in the Connector indent on your Bottle and locking it in with a coin. Replace your connector on your existing set or add to a Replacement Bottle. - Compatible with TWIST 450, 590, 600, and 750 Bottles - Not compatible with TWIST 800 or KEEGO Bottles - Compatible with all TWIST Bases: Bike Base, Tex-Base, and Uni-Base

If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties. On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame. - Compatible with frame tubes with a width of 28-62 mm - Rubber back for frame protection - Compatible with all TWIST Bottles - Attach and detach with ease

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

Hoses need to be wrangled, lest they become too uppity. Osprey's Hydraulics Three-Magnet Kit will hold things together. This pack comes with 3 detachable sternum strap magnets, and it'll make any pack Hydraulics Reservoir compatible!

• Installs on any 1/4-inch (.635cm) hose for easy disconnect/connect. • Bonus extra male piece and hose to connect to water filters.

The taste of water from a funky reservoir is high on the list of experiences that one should combat at all costs. This cleaning kit comes complete with a reservoir cleaning brush, delivery system brush, and a drying rack to help ward off uninvited microbial visitors looking to take up residence in your reservoir.

Osprey’s Hydraulics LT 2.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

All metal cup made of 304 Stainless Steel.

On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

Our updated MoFlo cap retains the same mechanism and delivers great flow. It's easier to clean with a flush top and improved grip. The MoFlo valve is easy to open, effortless to use, and 100% leak-proof when closed. - Flush top for easy cleaning. - Engineered poppet design provides 100% leak-free performance. - Valve is soft to the touch and effortless to open and close.

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes