Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

$81.00
Built strong to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Direct mount stem gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design - Designed to pair with BoXXer fork
$81.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design
$80.00
Velo Orange Removable Faceplate Quill Stem. For any classic roadie, tourer, mtb, or any other bike with a 1-inch threaded steerer. These stems feature a simple 2-bolt removable faceplate for use with any handlebars including modern bars with 31.8mm clamp diameters. The 90 degree extension gives a bit of rise without looking out of place on a custom build. - Height above insert: 130mm - Use shims for 25.4 handlebars (sold separately)
$79.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
$74.99 $150.00 50% Off
The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
$70.00
Built strong to take on the world's toughest trails, Descendant stems keep you pointed in the right direction. - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - S.H.I.S. Stem Clamp Diameter: 28.6
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
$69.99
EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA70 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 132g (100mm/0) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"
$69.99
The pro from down under, Boyd Hilder, is also getting a signature stem in our lineup, and it's well deserved. Boyd likes the familiar design DNA of our stems, but had specific Specs in mind to suit his all-around riding style. Clean looks, comfortable reach/rise, and a palm tree etching so you can take the beach-y vibes with you. - Boyd Hilder Signature - Unique surface contouring for superior handlebar grip - Six bolt clamping configuration - 6061-T6 aluminum, CNC machined
$69.99
The Odyssey Broc v2 stem is a refined update to Broc Raiford's popular signature Raft stem. The Broc stem utilizes a classic top-load and 6-bolt design, but it now comes with a slightly taller 33mm rise and sleeker lines below the clamp. The bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip. - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)
$69.99
Tom Dugan's signature DGN v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)
$69.99
Matt Nordstrom Signature edition stem features special surface contouring and a larger bolt head spec for superior handlebar grip. - Six bolt clamping configuration
$69.99
With Corey Walsh officially on the Odyssey PRO team as of 2021, talks of signature parts started right away. Odyssey needed a stem that suited Corey’s needs and riding style, so they got working on that quickly. This stem is unique to our line up given its reach and rise, and it is surely ready to rip! - Corey Walsh Signature - Unique surface contouring for superior handlebar grip - Six bolt clamping configuration - 6061-T6 aluminum, CNC machined
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
$64.99
Dakota Roche signature stem. Beefy but slick 1" OD clamping area for extra strength. - Bar Clamp Diameter (mm): 25.4 - Steerer Clamp Diameter: 1-1/8" ins
$64.99
Cult Redemption stem, for when you want a topload stem but without so much rise. - Wider and beefier than the OG Salvation stem - Improved clamping area - Recessed compression bolt for a clean look - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins
$64.99
Wider and beefier with and improved clamping area and recessed compression bolt for a clean look. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load
$64.99
The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break
$62.49 $125.00 50% Off
Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.
$62.00
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents
$60.00
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.
$29.99 - $60.00 $60.00 Up to 50% Off
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. - 3D-forged and CNC-machined 6061 alloy construction - 4-bolt oversized 31.8mm handlebar interface with relieved faceplate - Compatible with carbon composite handlebars
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
$59.99
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
$59.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
$59.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike
$59.95
- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm
$59.95
The new Ritchey Comp Trail 35 mountain bike stem is designed to accommodate modern MTB bars with a 35mm diameter, such as the new Ritchey Comp Trail Rizer 35. Strong, reliable, and ready for all of your shredding needs, the Comp Trail 35 stem is available in four lengths from 35-65mm and is made from 3D Net Forged 6061-T6 alloy. The head of the stem is vertically offset to the center of its body which allows for a 5mm rise or drop when flipped.
$59.00
TruVativ's Stylo T30 Stem is 3D forged from 7050 aluminum for that perfect balance of low weight, stiffness and precision steering control uphill or downhill. Four bolts securely attach the face plate and also make changing out handlebars a breeze.
$58.00
Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged front clamp diameter - Chromoly hardware
$54.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
$54.95
Ritchey's 4-Axis Adjustable Stem features a precision 3D-Net shaped forged shaft that interconnects with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. - Stainless steel bar and steerer clamp bolts - Stack Height: 40 - Weight: 219g
$53.00
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
$49.95 - $52.95
Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6
$50.00
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
$49.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm
$49.99
Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.
$49.95
- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)
$47.49
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
$40.00 - $45.00
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40
$45.00
The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 31.8mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish
$45.00
The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 35.0mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish
$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$44.99
EA50 alloy continues to provide both performance and excellent fitment options at a competitive price. From 3D forging processes to our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA50 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA50 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 140 (100mm/7) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"
$44.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
$44.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
$42.00 - $43.00
TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.
$41.99
The Treymone stem features a 51mm reach and a 27mm rise. - Trey Jones and Simone Barraco signature - Heat treated cro-mo M8 6mm solid hex bolts - Cold forged & CNC machined 6061-T6 Alloy
$40.00
Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy. - At least 37mm of steerer is required - Does not require a stem cap. Longer compression bolt included - Not compatible with carbon steerer tubes
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
$40.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
$39.99
The Slab Stem uses a new design with minimal machining keep cost low and strength high. We also added our small brass badge for a unique style. This stem has a cold-forged body and face plate from 6061 aluminum for high strength, and the recessed top face offers a clean look with our fork preload bolt. - Weight: 11.2-ounce - Reach: 50mm - Stack Height: 30mm - Rise: 31mm (Upright) / 2mm Drop (Invert) - Clamp Bolts: 8 x 1.25mm hardened chromoly (x4) - Pinch Bolts: 8 x 1.25mm hardened chromoly (x2)
$29.99 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
$22.49 - $38.99
High rise design with STC (Shark Tooth Clamping) inside the stem to help grip the bars. Central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.61 - Stem Type: Front Load